Print-on-demand · Retail vending

The DFY Phone Case. Custom printed phone cases in 3 minutes.

High-ticket, high-margin retail vending for Australian shopping centres, transit hubs and lifestyle precincts. Customers design a fully personalised phone case on-screen and walk away with it minutes later.

Model LN-LS-Phone CaseHW LN-LS-TMSW V1.0.0.5
DFY Phone Case custom phone case vending machine
At a glance

The machine in numbers

Footprint
1,100 × 870 × 2,140 mm
Net weight
300 kg
Power (AU)
230 V · 50 Hz · 10 A GPO
Print time
~3 min / case
On-board capacity
858 cases
Print resolution
Up to 1440 × 1440 dpi
Connectivity
AU 4G SIM + Wi-Fi
Payment
Nayax card & contactless
Technical specifications

Every detail, spelled out

The full manufacturer specification, retargeted for Australian deployment by Vend Brands.

Dimensions (W × D × H)
1,100 × 870 × 2,140 mm
Net weight
300 kg
Cabinet
Powder-coated steel with tempered glass viewing panel
Illumination
LED interior + illuminated topper sign
Wheels
Adjustable levelling feet, transport wheels for install
Site requirements

What we need at the venue

Every install is surveyed by Vend Brands before delivery.

Power

A single 230 V, 10 A standard AS/NZS 3112 GPO within 2 m of the machine footprint. Dedicated circuit preferred.

Floor & clearance

Level indoor floor rated for 300 kg. Minimum 1.2 × 1.0 m footprint with 600 mm rear clearance for servicing.

Network

Australian 4G SIM ships in the unit. Venue Wi-Fi supported as secondary. Nothing required from your IT team.

Environment

Indoor, climate-controlled space. 10 – 30 °C, non-condensing humidity. Away from direct sunlight and water ingress.

Compliance

Certifications & Australian deployment

Manufacturer certifications

CE / LVD
Low-voltage safety directive (EU scheme)
RoHS
Restriction of hazardous substances
RED cybersecurity
Radio equipment directive, cyber baseline
EN 62471
Photobiological safety of LED / UV sources

Australian deployment

Vend Brands supplies the Australian-configured unit: 230 V hardware, Type I plug, Australian 4G SIM and Nayax card terminal onboarded for AU merchant settlement.

CE-scheme certifications are provided for reference. Australian RCM compliance and any venue-specific electrical inspections are handled by Vend Brands prior to install, so the machine is drop-in ready for your site.

What you get

Included with every DFY Phone Case

AU-configured DFY Phone Case machine (230 V, Type I plug, local SIM)
Site survey, delivery, install and hand-over by Vend Brands
Initial stock of blank cases, inks and consumables
Nayax card terminal, merchant onboarding and settlement into your account
Real-time dashboard access (sales, stock, uptime)
Restocks, ink swaps, cleaning and technician callouts by Vend Brands
Ongoing content and firmware updates over-the-air
Revenue calculator

Play with the numbers

Illustrative only, tune the sliders to your expected site velocity. Real performance depends heavily on placement, foot traffic and marketing.

10 / day
30% MagSafe · 70% standard
7 days / wk
Assumes retail A$35 standard / A$50 MagSafe. Consumables & blank cost estimated at A$5.30 / A$7.50.
Avg sell price
$40
Gross margin per case
$34
85% margin
Weekly revenue
$2,765
Weekly gross profit
$2,348
Monthly gross profit
$10,174
Annual gross profit
$122,086
on $143,780 revenue

Illustrative only. Not a guarantee of returns. Actual results vary by location, product mix and season.

In the wild

DFY Phone Case on location

DFY Phone Case custom phone case machine on location
DFY Phone Case custom phone case machine on location
DFY Phone Case custom phone case machine on location
Interested in owning one?

Let's see if a DFY Phone Case fits your venue or portfolio.

15-minute discovery call with the Vend Brands team. We'll walk through economics, placement and next steps, no pressure.